Validating cluster resource ip address

08-Jul-2017 02:35

If an MM error is returned which is not defined in the standard Fs Rtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.

In this case information is lost, however, the filter correctly handles the exception.

On the KTM-HOST1, Open Server Manager, click Tools, and then click i SCSI Initiator. On the Discover Target Portal, In the IP address or DNS name box, 192.168.11.1, which is the IP Address of i SCSI target server and then click OK.

Right-click on Disk 3, and then click Initialize Disk.

On the Assign Drive Letter or Path page, click Next. On the Format Partition page, in the Volume label box, type Quorum.

Verify that the network path is correct and the destination computer is not busy or turned off.

143 The system cannot join or substitute a drive to or for a directory on the same drive. 173 A lock request was not outstanding for the supplied cancel region. 1051 A stop control has been sent to a service that other running services are dependent on.

8 Not enough storage is available to process this command. 142 The system cannot perform a JOIN or SUBST at this time. The caller now needs to enumerate the files to find the changes.

In this article, we will build a two-node failover cluster using i SCSI QNAP storage, using three Networks for failover cluster network. Step 1: Configure Shared Storage (i SCSI Target) Step 2: Connect to i SCSI target from both host machines Step 3: Initializing Disks Step 4: Install Hyper-V Roles on both host machines Step 5: Install Failover Cluster Features on both host machines Step 6: Create a Virtual Switch (Production) on both host machines Step 7: Validate the cluster configuration Step 8: Creating a Hyper-V Failover Cluster Step 9: Rename Cluster Networks Step 10: Enabling Cluster Shared Volumes Step 11: Create a VM and Configure for High Availability Step 12: Making an existing VM Highly Available Step 13: Testing the Failover Cluster Step 1: Configure Shared Storage (i SCSI Target) Here we are using QNAP shared storage Step 2: Connect to i SCSI target from both Hyper-V HOSTS 1. On the i SCSI Initiator Properties dialog box, click Discovery tab and then click Discover Portal. Select each of the targets list and click Connect to add them. On the Connect To Target dialog box, select Add this connection to the list of Favorite Targets, and then click OK.

Note: To download Web Sphere MQ Fix and Refresh Packs follow this link.

v Center Server 5.1 Update 2 | | Build 1473063 v Center Server 5.1 Update 2 Installation Package | | Build 1474365 v Center Server Appliance 5.1 Update 2 | | Build 1474364 Last updated: Check for additions and updates to these release notes.

These task return error codes, which do not mean much to the user. 149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. 160 The argument string passed to Dos Exec Pgm is not correct. 1057 The account name is invalid or does not exist, or the password is invalid for the account name specified.

The table below describes these Error codes Code Description 0 The operation completed successfully. 150 System trace information was not specified in your CONFIG. 151 The number of specified semaphore events for Dos Mux Sem Wait is not correct. 157 The segment is already discarded and cannot be locked. 1058 The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. 1060 The specified service does not exist as an installed service.

In this article, we will build a two-node failover cluster using i SCSI QNAP storage, using three Networks for failover cluster network. Step 1: Configure Shared Storage (i SCSI Target) Step 2: Connect to i SCSI target from both host machines Step 3: Initializing Disks Step 4: Install Hyper-V Roles on both host machines Step 5: Install Failover Cluster Features on both host machines Step 6: Create a Virtual Switch (Production) on both host machines Step 7: Validate the cluster configuration Step 8: Creating a Hyper-V Failover Cluster Step 9: Rename Cluster Networks Step 10: Enabling Cluster Shared Volumes Step 11: Create a VM and Configure for High Availability Step 12: Making an existing VM Highly Available Step 13: Testing the Failover Cluster Step 1: Configure Shared Storage (i SCSI Target) Here we are using QNAP shared storage Step 2: Connect to i SCSI target from both Hyper-V HOSTS 1. On the i SCSI Initiator Properties dialog box, click Discovery tab and then click Discover Portal. Select each of the targets list and click Connect to add them. On the Connect To Target dialog box, select Add this connection to the list of Favorite Targets, and then click OK.

Note: To download Web Sphere MQ Fix and Refresh Packs follow this link.

v Center Server 5.1 Update 2 | | Build 1473063 v Center Server 5.1 Update 2 Installation Package | | Build 1474365 v Center Server Appliance 5.1 Update 2 | | Build 1474364 Last updated: Check for additions and updates to these release notes.

These task return error codes, which do not mean much to the user. 149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. 160 The argument string passed to Dos Exec Pgm is not correct. 1057 The account name is invalid or does not exist, or the password is invalid for the account name specified.

The table below describes these Error codes Code Description 0 The operation completed successfully. 150 System trace information was not specified in your CONFIG. 151 The number of specified semaphore events for Dos Mux Sem Wait is not correct. 157 The segment is already discarded and cannot be locked. 1058 The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. 1060 The specified service does not exist as an installed service.

147 Not enough resources are available to process this command. 180 The system detected a segment number that was not correct. 183 Cannot create a file when that file already exists. 187 The specified system semaphore name was not found. 1053 The service did not respond to the start or control request in a timely fashion.